PCT Advance Search
made in USA FB TW youtube














 

Our new High-Performance Machining Plus+ End Mills, H235 and H337 Series, are engineered exclusively for high-speed milling centers. The H235 and H337 run at maximum spindle speed and power, achieving RPMs as high as 33,000. Furthermore, the H235 & H337 Series allow for increased productivity and reduced machining time, during operations of Aluminum applications.

 

Benefits:

  • Higher speeds & feeds
  • Increased productivity
  • Reduced machining time
  • Improved tool balance
  • Coolant holes(available upon request)
  • Radii (available upon request)
 
 

Applications:

  • Aluminum
    …and its alloys
 

 

 

558 Seriesis ideal for Stainless Steels, Titanium, Cast Iron and other alloy applications. Its design consists of an eccentric OD, sharp corners, asymmetrical flutes and a 35°Helix. The 558 Series is excellent for users that are looking for increased metal removal rates, without the loss of speed or tool life. The 5-Flute Variable is engineered to eliminate harmful harmonics at the point of contact, producing a smooth finish on the part. In addition, the 558 Series provides users chatter-free machining and improved milling accuracy.

The 558 Series is available with Exxtral Silver® coating, which is excellent for high-speed operations, dry or semi-dry machining. Exttral Silver® coating also reduces friction between the chip and tool, resulting in a longer tool life. The 558 Series can be modified with corner chamfer/radius, left-hand spiral and extended neck. 

 

558 Series Face

 
 
 

Benefits:

  • Increased metal removal rates
  • Increased depth-of-cut
  • Improved accuracy
  • Chatter-free machining
  • Higher speeds & feeds
  • Superior surface finish on the part
 
 

Applications:

  • Stainless Steels
  • Titanium
  • Cast Iron
    …and their alloys
 
 
558 Series Specs
430 Series
 

430 Series is engineered specifically for difficult-to-machine materials. Its design consists of coarse teeth, a negative rake angle and a 40°Helix; a design ideal for high-speed operations of hard materials. The 430 Series is excellent for machining the following: Titanium, Stainless Steels, Carbon Steels, Gray Cast Iron, Hardened Tool Steels and their alloys.

The 430 Series is available with Z-Power® Coating, to reduce friction between the chip and the tool. The 430 Series is available in four and six flutes, both with negative rake angles for increased edge strength.

430 Series face

 
 
 

Benefits:

  • Increased metal removal rates
  • Minimized cutting pressure
  • Reduced machining time
  • Longer tool life
  • Long-term cost savings
 
 

Applications:

  • Aluminum
    …and its alloys
 
 
430 Series Specs

W345

 

W345 Seriesis engineered specifically Aluminum applications. Its design consists of a wiper flat on the end face, primary and secondary angles, a 45° Helix; a design ideal for large metal removal rates and a smooth finish on the part.
The W345 Series is available with Z-Power® Coating, to reduce friction between the chip and the tool. The W345 Series also comes with an extended neck for deep-pocket applications.

w345 Icons

W345 FACE

 
 
 

Benefits:

  • Increased metal removal rates
  • Improved accuracy
  • Chatter-free machining
  • High speeds & feeds
  • Superior surface finish on the part
 
 

Applications:

  • Aluminum
    …and its alloys
 
 
W345
 
Welcome to PCT Cutters Endmills and Drill Solutions